PIA
RINGER
FORM
NO
.
ISS
1, SECTION 502-304-101
SCREWS
P-25E803
NUMBER CARD
RETAINER
Fig.
3-lnterior
of
ADl
Telephone Base (Current Production)
HAND
TELEPHONE
SET PLUG
(T
APERED GROMMET)
Fig.
4-H4DB
Cord
e
ACl
base
(for
vertical
mounting)-jack
equipped to receive plug-ended handset cord.
e
ADl
base (for horizontal
mounting)-jack
equipped to receive plug-ended handset and
mounting cords.
e A lead control (optional).
e 4-party full selective or 8-party semiselective
ringing by adding 426N diode (optional).
e Space provided on bases for number card
and associated number card retainer.
e
The
cover of the
ACl
telephone base permits
hanging the hand telephone
set
along either
side of
the
base by hooking the receiver
end
on
the
top
edge
of
the
cover. This
feature
permits
hanging
up
the
handset
without going to
on
-hook position.
Page 3
TCI Library: www.telephonecollectors.info
To Next Page
Loading...
