AT&T Smart Wi-Fi Extender - Pairing Devices; WPS Button Procedure

Pair
Press
the WPS
button
on your
AT&T
Wi-Fi
Gateway.
Press
the WPS
button on
your Wi-Fi
Extender.
Wait
about 3 minutes
for the devices
to automatically
pair. The 5GHz and
2.4GHz lights will
turn solid GREEN
when paired.
Note: The lights may turn o
during pairing. This is normal.
If they do not light up solid
GREEN within 5 minutes, repeat
the pairing process.
Note: The 5GHz light will blink every 5 seconds.
This is normal.