AT&T Spirit Communications System - Call Hold Procedures; Placing a Call on Hold (System-wide Retrieval); Placing a Call on Hold (Local Retrieval Only); Retrieving a Held Call

20
Hold
Hold
■ Hold (so the call can be retrieved from any telephone in the system)
● Press HOLD/PAUSE.
■ Hold (so the call can be retrieved at your telephone ONLY— may be used for outside lines that are
not part of a conference)
● Press HOLD/PAUSE twice.
■ Retrieve Call on Hold
● Press line or INTERCOM button of call on hold. ● Lift receiver (or press SPEAKER).
■ Retrieve a Held Line not Programmed on a Button (Pickup by Line-2448 System)
● Press INTERCOM. ● Lift receiver (or press SPEAKER). ● Dial ✱ 5. ● Dial two-digit line number
(01 through 24).