21
Operate
Operation Steps
To end a cell call Using a cordless handset:
f Press OFF/CANCEL, or place the cordless handset into
the charger.
Using the telephone base:
f Press the corresponding cell button, CELL A or
CELL B .
-OR-
f Press SPEAKER or return the corded handset to the
telephone base.
Handset
speakerphone
During a call, press /SPEAKER to switch between
handsfree speakerphone and normal handset use.
Redial Using a cordless handset:
1. Press REDIAL/PAUSE in idle mode.
2. Press
CID, DIR, or REDIAL/PAUSE
repeatedly to
browse until the desired number displays.
The handset
beeps twice at the end of the list.
3. Press LINE 1/FLASH, LINE 2/FLASH, or
/SPEAKER to
dial using line 1 or line 2,
or press A CELL or B CELL
to dial using the cell line.
Using the telephone base:
1. Press REDIAL/PAUSE in idle mode.
2. Press
CID, DIR, /RECORD, or /DELETE
to browse
until the desired number displays. The telephone base
beeps twice at the end of the list.
3. Press LINE 1, LINE 2, or SPEAKER
to dial using line 1
or line 2,
or press Cell A or CELL B to dial using the
cell line.
Volume control To adjust the listening volume of a cordless handset:
f Press q/p while on a call.
To adjust the listening volume of the telephone base:
f Press /VOLUME/ while on a call.
To Next Page
Loading...
