22
Operation Steps
Call waiting
(Requires
subscription from
telephone)
Call waiting on line 1 or line 2
Using a cordless handset or the telephone base:
f Press the corresponding line button, LINE 1/FLASH
or LINE 2/FLASH on the handset, or FLASH on the
telephone base to put your current call on hold and take
the new call.
f Press the same key at any time to switch back and forth
between calls.
Call waiting on the cell line
To answer the incoming call from the same cell line:
Using a cordless handset:
f Press SWAP , A CELL or B CELL on the handset. The
original call is put on hold and you take the new call.
f Press OPTION on the handset. Press CID or DIR to
highlight Swap cell X (X represents the cell line slot).
Press SELECT to resume the original call. The other
incoming cell call is put on hold.
Using the telephone base:
f Press SWAP , CELL A or CELL B on the telephone
base. The original call is put on hold and you take the new
call.
f Press OPTION on the telephone base. Press CID, DIR,
/RECORD, or /DELETE to highlight Swap cell X (X
represents the cell line slot). Press SELECT to resume the
original call. The other incoming cell call is put on hold.
Operate
To Next Page
Loading...
