12
Bluetooth setup
Bluetooth wireless technology operates within a short range (up to 30 feet).
When you pair a Bluetooth cell phone or Bluetooth headset to the telephone
base, keep the device within 15 feet of the telephone base for optimal
performance.
Pair your first cell phone
To pair and connect a cell phone:
Press the MENU softkey on the telephone base in idle
mode to enter the main menu.
Press DIR, CID, /DELETE or
/REC
to highlight
Bluetooth, then press the SELECT softkey.
Press DIR, CID, /DELETE or
/REC
to highlight
Add cellular, then press the SELECT softkey. The
screen displays Please set your cell to search for
devices then press
−¬
v
. Press the NEXT softkey.
Turn on the Bluetooth feature of your cell phone and
search for or add new devices.
Once your cell phone finds AT&T DECT 6.0, press the
appropriate key on your cell phone to continue the
pairing process.
Enter the PIN of the telephone base (the default PIN is
0000) into your cell phone.
When a device is successfully paired, the telephone
base displays Pairing complete.
The telephone base then displays Connect cell to
base? Press the YES softkey to connect your cell
phone to the telephone base. For certain cell phones,
you may also need to press a key on your cell phone
to confirm the connection. The telephone base displays
Device connected to the base. The corresponding
status icon ( A or B) displays. The corresponding
device light on the telephone base (DEVICE A or
DEVICE B) turns on.
If you have trouble pairing your cell phone, it may not
be compatible with your TL86109. Check the Bluetooth
compatibility list at www.telephones.att.com.
NOTES:
The pairing process may take up to one minute. If the pairing process fails, try again.
The steps for the pairing process may vary for different cell phones. If this happens,
follow the prompts on your cell phone and your TL86109 to complete the
pairing process.
Refer to the user’s manual of your cell phone on how to search for or add a new
Bluetooth device.
1.
2.
3.
4.
5.
6.
7.
8.
•
•
•
AT&T DECT 6.0
discoverable
PIN:0000
Answering sys
Directory
Call log
Bluetooth
SELECT
BLUETOOTH
Download dir
Add cellular
Add headset
SELECT
Please set your
cell to search
for devices
then press -
NEXT
~
-
Connect cell
to base?
YES NO
Device
connected
to the base
Pairing
complete
To Next Page
Loading...
Need help?
General
