AT&T TL88102 - Ringer Volume; Setting Handset Ringer Volume; Ringer Tone; Choosing Handset Ringer Tone

16
Initial basic settings
Date and time
Note: Set the date/time before using the answering system.
Using a cordless handset or the telephone base:
1. MENU -> / -> Settings -> SELECT .
2. / -> Set date/time -> SELECT .
3. Enter the month (MM) -> SET -> Enter the day (DD) -> SET -> Enter the year
(YY) -> SET .
4. Enter the hour (HH) -> SET -> Enter the minute (MM) -> SET .
5. / -> AM or PM -> SET .
Aer you install your telephone or power returns following a power outage, the
telephone will prompt you to set the date and time. To skip setting the date and
time, press OFF/CANCEL on the handset or CANCEL on the telephone base.
We recommend you program your telephone system before use. The following
are a few examples of common features to set before using the telephone. Refer to
the Handset and telephone base settings and Answering system settings in the
Complete user’s manual for detailed instructions on setting all telephone features.
Record your own announcement
Your outgoing announcement plays when calls are answered by the answering
system. You can use the preset announcement to answer calls, or replace it with
your own recorded announcement.
Using a cordless handset:
1. MENU -> / -> Answering sys -> SELECT .
2. / -> Mailbox 1 or Mailbox 2 -> SELECT .
3. / -> Ans sys setup -> SELECT .
4. / -> Announcement -> SELECT .
5. Press 7 to record.
6. Speak towards the handset to record your announcement and press 5 to end
recording and save it.
Using the telephone base:
1. /REC -> / -> Announcement -> SELECT .
2. / -> Mailbox 1 or Mailbox 2 -> SELECT .
3. Speak towards the telephone base to record your announcement and press 5 to
end recording and save it.