AT&T TL88102 - Handset Settings; LCD Language; Voicemail and Indicator Management

17
Number of rings
You can set the answering system to answer an incoming call aer 2, 4 or 6 rings.
You can also select toll saver. If you choose toll saver, the answering system answers
a call aer two rings when you have new messages, or aer four rings when there
are no new messages. This enables you to check for new messages and avoid
paying unnecessary long distance charges if you are calling from out of your local
area.
If you want the built-in answering system instead of the voicemail to answer a call,
you should set the answering system to answer a call at least two rings before the
voicemail is set to answer. Contact your telephone service provider for information
on your voicemail settings.
Using a cordless handset or the telephone base:
1. MENU -> / -> Answering sys -> SELECT .
2. / -> Mailbox 1 or Mailbox 2 -> SELECT .
3. / -> Ans sys setup -> SELECT .
4. / -> # of rings -> SELECT .
5. / to choose among 2, 4, 6 or Toll saver -> SET .
Ringer volume
You can set the ringer volume level to one of the six levels, or turn the ringer o.
Using a cordless handset or the telephone base:
1. MENU -> / -> Ringers -> SELECT .
2. SELECT to select Ringer volume.
3. / -> Line 1, Line 2 or Lines 1&2 -> SELECT .
4. / to choose the desire level -> SET .
LCD language
Using a cordless handset or the telephone base:
1. MENU -> / -> Settings -> SELECT .
2. SELECT to select LCD language.
3. / -> English, Français or Español -> SET .
Initial basic settings