AT&T TL88102 - Key Tone (Base); Enabling;Disabling Base Key Tones

24
Turn answering system on or o
The answering system must be turned on to answer and record messages.
Using the telephone base:
f Press /ANSWER ON/1 and/or /ANSWER ON/2 to turn the answering
system on or o. If the answering system is turned on, it announces, “Calls will be
answered.” If the answering system is turned o, it announces, “Calls will not be
answered.”
Using a cordless handset:
1. MENU -> / -> Answering sys -> SELECT .
2. / -> Mailbox 1 or Mailbox 2-> SELECT .
3. / -> Ans sys setup -> SELECT .
4. / -> Answer ON/OFF -> SELECT .
5. / to choose On or O-> SET .
When the answering system is on, the handset shows
AnS1
ON
,
AnS
ON 2
or
AnS1
ON 2
.
Message alert tone
When this feature is on, the telephone base beeps every 10 seconds when there is
new messages.
Using a cordless handset or the telephone base:
1. MENU -> / -> Answering sys -> SELECT .
2. / -> Mailbox 1 or Mailbox 2-> SELECT .
3. / -> Ans sys setup -> SELECT .
4. / -> Msg alert tone -> SELECT .
5. / to choose On or O -> SET .
Answering system