AT&T TL92270 - Wall-Mount to Tabletop Installation

11
Getting started
Installation options
Wall-mount to tabletop installation
To change the telephone base from the wall-mount position to tabletop
position, follow the steps below.
If the telephone line cord and power adapter cord are bundled, untie them
first. Remove the wall-mount bracket from the wall.
Unplug the telephone line cord (or DSL filter) from the wall. Unplug the
power adapter from the power outlet. Lift the telephone base up to detach
it from the plastic wall-mount bracket.
Push the wall-mount bracket up to remove it from the wall.
See Telephone base installation on page 6.
1.
2.
3.
4.