AT&T TL92270 - Chain Dialing; Options While on Calls

46
Telephone operation
Options while on calls
Chain dialing
Use this feature to initiate a dialing sequence from numbers stored in the
directory, call log or redial while you are on a call.
Chain dialing can be useful if you wish to access other numbers (such as bank
account numbers or access codes) from the directory, call log or redial list.
To access a number in the directory while on a call:
Press MENU/SELECT.
Press CID or DIR to highlight Directory, then press MENU/SELECT.
Press CID or DIR to highlight the desired directory, then press
MENU/SELECT.
Press CID or DIR to scroll to the desired entry or perform an
alphabetical search (page 57).
Press MENU/SELECT to dial the displayed number.
To access a number in the call log while on a call:
Press MENU/SELECT.
Press CID or DIR to highlight Call log, then press MENU/SELECT.
Press CID or DIR to scroll to the desired entry.
Press MENU/SELECT to dial the displayed number.
To access the redial list while on a call:
Press REDIAL/PAUSE.
Press DIR, CID or REDIAL/PAUSE until the desired number displays, then
press MENU/SELECT. If you do not press MENU/SELECT within two seconds,
the number displayed is dialed automatically.
NOTES:
You can only view the numbers in the directory, call log or redial list while on a call and
cannot edit, delete or save entries.
Press and hold OFF/CLEAR to exit redial, directory or call log while on a call.
1.
2.
3.
4.
5.
1.
2.
3.
4.
1.
2.
1.
2.