70
Answering system
Base message counter displays
Message window displays
0
No messages.
0 (flashing)
You need to set the clock (page 30).
0-6
Displays for two seconds while adjusting the
telephone base ringer volume.
1-8
Displays for two seconds while adjusting the
telephone base speaker volume.
1-99
Total number of old messages and memos, or
message number currently playing during old message
playback.
1-99 (flashing)
Total number of messages and memos. The number
flashes when there are new (unreviewed) messages.
After a power failure, the number in the message
counter flashes to indicate that you need to set
the clock.
1-99 & F
(alternating)
Memory is full. You must delete some messages
before recording new messages.
- -
The system is answering a call on the telephone base,
or someone is trying to reach it remotely.
The system is in program mode.
NOTE: When the memory is full, the answering system answers incoming calls after 10
rings and announces, “Memory is full. Enter the remote access code.“
To Next Page
Loading...
