AT&T Trimline TR1909 - About the Feature Menu; Feature Summary

8
9
The table below provides a summary of the feature menu. Use the
instructions below to change the setting in the menu:
When the telephone is idle, press OPTION/SELECT repeatedly
until the screen displays the desired feature.
Press or until the screen displays the desired setting.
Press OPTION/SELECT within 10 seconds to save
your selection and move to the next feature.
- OR -
Press CLEAR to exit without saving your selection
and return to idle mode.
- OR -
Wait 10 seconds to exit without saving your selection and return
to idle mode automatically.
1.
2.
3.
About the feature menu
Default settings are indicated by an asterisk (*).
Screen display Function Options
SET CONTRAST
Adjust the screen brightness to a
comfortable level, from 1 (lightest) to 5
(darkest). The contrast may be different
for desktop and wall mount installation.
1, 2, 3*, 4, 5
HOME AREA CODE?
Set the telephone to recognize calls
from the home area code.
HAC - ___
LOCAL AREA CODE?
Program up to four area codes which
may not require dialing 1 before them.
LAC 1- ___
LAC 2- ___
LAC 3- ___
LAC 4- ___
SET TIME/DATE Set the time and date on the handset. 12:00
AM
, 1/01
SET LANGUAGE Choose the screen display language.
ENGLISH*
FRANCAIS
ESPANOL
SET TONE/PULSE
Set whether the telephone should be
tone dial or pulse dial.
TONE*
PULSE
NOTE: The features are listed in the order they appear after the initial setup.
When you first install batteries, the order is: SET LANGUAGE, SET CONTRAST,
HOME AREA CODE?, LOCAL AREA CODE?, SET TIME/DATE and SET TONE/PULSE.
Feature summary