AT&T Trimline TR1909B - Telephone Memory; Memory Operation (One-Touch)

20
21
This telephone has 13 memory locations with three
one-touch memory location keys (M1, M2, M3) and
10 speed dial memory locations (0 through 9). Each
location can hold a number up to 32 digits.
To store a number in a one-touch memory location
Follow the steps below to store a number in a one-touch memory
location:
Lift the handset and press PROG.
Use the dialing keys to enter the number you
want to store.
Press PAUSE/REDIAL once to store
a three-second pause in the dialing
sequence, twice for a six-second pause
and so on.
- OR -
Press PAUSE/REDIAL to store the last
number dialed.
Press the one-touch memory location
key (M1, M2 or M3) where you want the
number to be stored. The screen briefly
displays EX, where X is the memory location.
NOTES:
When you store a new number in a one-touch memory location, the old entry is
replaced and cannot be retrieved.
If you pause for over 10 seconds when programming an entry, the procedure
will time out and you will have to begin again.
1.
2.
3.
•
•
Memory operation (one-touch)
10 : 03
AM
12/01
8888832445
Pro
10 : 03
AM
12/01
8888832445
E1 Pro
Telephone memory