AT&T Trimline TR1909B - Memory Operation (Speed Dial)

22
Telephone memory
23
To store a number in a speed dial memory location
You can store up to 10 numbers in the speed dial memory locations
(0 through 9). Each location can hold a number up to 32 digits.
To store a number in a speed dial memory location:
Lift the handset and press PROG.
Use the dialing keys to enter the number
you want to store. Press PAUSE/REDIAL once
to add a three-second pause in the dialing
sequence, twice for a six-second pause and so on.
- OR -
Press PAUSE/REDIAL to store the last number dialed.
Press MEMORY, then press the dialing key
(0 through 9) where you want the number
to be stored. The screen briefly displays
AX, where X is the memory location.
NOTES:
When you store a new number in a speed dial memory location, the old entry is
replaced and cannot be retrieved.
If you pause for over 10 seconds when programming an entry, the procedure will
time out and you will have to begin again.
To review a number in a speed dial memory location
To review a number in a speed dial memory location, lift the
handset and hold down the switch hook on the handset, then press
MEMORY and the dialing keys (0 through 9). The number stored in
that speed dial memory location is displayed on the screen.
To dial a number in a speed dial memory location
Lift the handset and press MEMORY.
Use the dialing keys (0 through 9) to choose the desired speed dial
memory location. The telephone automatically dials the telephone
number stored in the selected speed dial memory location.
1.
2.
3.
•
•
1.
2.
Memory operation (speed dial)
10 : 03
AM
12/01
8888832445
Pro
10 : 03
AM
12/01
8888832445
A1 Pro