Select the network Authentication mode. The options are:
• NONE (default)
• CHAP
• PAP
Enter the Username and Password, if these are required for
the wireless network.
Click Save.
To select the APN entry to use:
From the drop-down box beside Profile Selection, select the
desired APN to use.
To remove an APN entry:
Select the APN you want to remove, and click Delete.
Enable DMZ
In a DMZ (demilitarized zone) network configuration, a
computer runs outside the firewall in the DMZ. This computer
intercepts incoming Internet traffic, providing an extra layer of
protection for the rest of the network.
To enable DMZ and designate a computer to screen
incoming traffic:
On the AT&T Wi-Fi Manager home page, log in as
Administrator.
Click Settings on the navigation menu on the left side.
49Advanced SettingsAdvanced Settings48
Click Firewall > DMZ tab.
Select Enable beside DMZ.
In the DMZ IP Address field, enter the IP address of the
computer you want to have in the DMZ.
Click Apply.
Set Router Options
To set the mobile hotspot’s LAN options:
On the AT&T Wi-Fi Manager home page, log in as
Administrator.
Click Settings on the navigation menu on the left side.
Click Advanced > Router tab.
Enter the desired information in the each section.
If the DHCP Server is enabled, it automatically assigns an IP
address to each device on the network and manages their
configuration information.
Click Apply.
To Next Page
Loading...
