A73023530 - 2021-12
iLifestyle Quick Start Guide
For a full descripon of the operaon of your iLifestyle WiFi
radiator please refer to the main manual.
Controls
Time/Day
Heating
Indicator
Current
Mode Icon
Up Key
Down Key
Standby Key
Lock icon
Current Temp/
set point
Mode Key
OK Key
Manual
Mode Key
Comfort Mode
Eco Mode
An-Frost Mode
Easy Mode
Easy mode is designed to allow you to use
the radiator with just temperature control
and Standby/On To access the easy mode,
touch and hold the OK and MODE keys
together unl you have the screen shown
on the right.
Touch OK twice to move to “Param.2” and then touch the up
key to change 1P to 2P and touch OK. To exit easy mode, enter
the same menu and change 2P to 1P and touch OK.
When in Easy mode the screen will change
to show the current room temperature.
The temperature required can be set with
the ▼ and ▲ keys and switch the radiator
on or o with the Standby key. None of the
other keys or funcons are available.
WiFi Menu
The WiFi menu shows the required informaon to allow the
radiator to be linked to a users WiFi Network.
There are 4 or 5 available, depending on whether the radiator
has a linked WiFi network or not, The Menus can can be
selected using the ▼ and ▲ keys, and by touching the OK key
when the desired menu is highlighted.
For all funcons in the WiFi menu, please refer to the main
operang manual.
Operating Modes
To choose which way the radiator will run
touch the MODE key to show the MODES
menu. Each of the 4 modes will change the
way the radiator works. Use the ▼ and
▲ keys to select a connuous mode and
touch OK.
Comfort Mode
Comfort mode is used for connuous heat between 12 and 30
°C. It is typically used when you are at home and want to bring
the radiator on without seng a program or using manual
mode. Temperatures can be adjusted directly using the ▼ and
▲ keys.
Eco – Economy Mode
Economy mode temperature can be set between 0.5 and 4.5 °C
less than the comfort temperature. Temperature sengs can
be adjusted directly using the ▼ and ▲ keys. Economy is used
in program mode and situaons where you don’t need full heat
but require a lower level of heat to prevent the temperature
falling excessively.
Anti-Frost Mode
An-Frost is factory set at 7 °C and is used in the Program
Mode as an o set point within a program; it is also used for
long periods of absence when you want to avoid freezing in the
heated zone.
Program Mode
The Program mode allows you to set your
own schedule according to your daily or
weekly needs.
The program display is shown as two 12
hour clock faces, 00:00 to 11:59 and 12:00
to 23:59.
Each ½ hour segment of the day can be programmed to
Comfort, Eco or An-Frost (see Controls secon).
Edit program (when in Program Mode)
To begin eding the program touch the OK key, the radiator
will begin with the current day if it is set, change the day to be
programmed with the ▼ and ▲ and then touch OK.
The program then moves on to seng the heang mes of the
day; you can move backward and forward through the mes to
pick which temperature seng is required.
Using ▼ and ▲ to reach the me that you want to have the
heang on, touch MODE to change between Comfort, Eco, or
An-Frost.
Move forward for each ½ hour and touch MODE to select
seng for each segment of the day. The display will change
from AM to PM when appropriate.