ATEL WB550 Apex by ATEL
User Manual
V2.3, July 20, 2023
You can disable the combined WiFi feature and configure 2.4GHz & 5GHz WiFi radio
as required.
2.4GHz WiFi Settings
If you disable the combined WiFi Feature, you can select the WiFi 2.4GHz option
and setup the configuration as required.
Figure 15 WiFi > 2.4GHz WiFi
# WiFi Status: Enabled (default)/Disabled
The WiFi status is enabled by default. If disabled, you can only connect to the router
by Ethernet cable.
# WiFi Standard:
This router can be operated in six different wireless modes: “11b/g/n/ax mixed
mode”, “11b/g/n mixed mode”, ”11b/g mixed mode”, “11n only”, “11g only”, “11b only”.
You can set your preferred mode as shown in the image below.
To Next Page
Loading...
Need help?
General
