Atel Apex WB550 User Manual

ATEL WB550 Apex by ATEL
User Manual
V2.3, July 20, 2023
25
3.4.2.3 WPS
On this page, you can setup the WPS (WiFi Protected Setup) feature which allows
your wireless client/device to connect with the WB550 router over WiFi with ease.
You need to scan the WiFi network from your wireless device/client and select the
available WIFI SSID from your WB550. Then simply either press the WPS button for
10 seconds or click on the Start PBC button available on WebGUI.
Your wireless client/device will connect with WB500 over WiFi without any
password input.
# WPS Status – Displays the WPS status. When you push the WPS button, the
WPS status changes from "Idle" change to "Processing…". After the connection
process is completed, the WPS status change to “Successfully Connected”.
You can click on the Disable button to disable the WPS feature, if required.
# Frequency – Select the WPS connection as either 2.4G WiFi or 5G WiFi.
# Start PBC - Click on this button to turn on the WPS feature. You can also use the
WPS button available on the bottom panel of your WB550.
Figure 30 WiFi > WPS Settings

Atel Apex WB550 Specifications

General

Brand	Atel
Model	Apex WB550
Category	Network Router
Language	English