Need help?Do you have a question about the ATEN CS19208 and is the answer not in the manual?
General| DC-in jack | Yes |
|---|---|
| Console ports | 3.5mm headphone, DisplayPort, HDMI, USB A |
| DisplayPorts quantity | 8 |
| Console USB ports quantity | 6 |
| Number of computers controlled | 128 |
| USB 3.2 Gen 1 (3.1 Gen 1) Type-A hub ports quantity | 2 |
| Video bandwidth | 60 Hz |
| Maximum resolution | 4096 x 2160 pixels |
| Auto scan delay (max) | 255 s |
| Auto scan delay (min) | 0 s |
| Product color | Black |
| Housing material | Metal |
| Power consumption (typical) | 18.44 W |
| Storage temperature (T-T) | -20 - 60 °C |
| Operating temperature (T-T) | 0 - 40 °C |
| Operating relative humidity (H-H) | 0 - 80 % |
| Cables included | Audio (3.5mm), DisplayPort, USB |
Weight and Dimensions| Depth | 432.4 mm |
|---|---|
| Width | 214.3 mm |
| Height | 44 mm |
| Weight | 3110 g |
Register your product at the ATEN online support center for assistance and updates.
Contact ATEN for telephone support using the provided international phone numbers.
Important information regarding manual changes, warranties, software, and user responsibilities.
Describes how to remove and add components without shutting down the unit.
Covers port selection methods, manual switching, and port ID numbering for accessing computers.
Provides the procedure for safely powering off and restarting the CS19208/CS19216 switch.
Introduction to the OSD, its login process, and manufacturing number details.
Details the OSD main screen, its headings, and how to navigate through menus.
Explains how to use OSD functions for configuring and controlling the KVM switch.
Describes how to invoke the OSD using a hotkey combination.
Allows direct KVM focus control to computers via keyboard hotkeys.
Used to configure switch settings and hotkey behavior.
Hotkeys for selecting active ports, auto scanning, and skip mode.
Hotkeys for restoring defaults, setting EDID, DynaSync, and mouse emulation.
Emulates Mac keyboard functions using a PC compatible keyboard.
Emulates Sun keyboard functions using a PC compatible keyboard with Ctrl key.
Details RS-232 setup, hardware connection, and pin assignments for serial control.
Establishing and managing a HyperTerminal session for RS-232 control.
Reference for essential RS-232 commands like login, logout, switch port, and firmware upgrade.
Steps for downloading, preparing, and starting the firmware upgrade utility.
Procedure to recover the switch if a firmware upgrade fails.
Using the utility to backup and restore OSD configuration settings.
Essential safety guidelines for product use, installation, and maintenance.
Instructions and precautions for mounting the KVM switch in a server rack.
Information on obtaining technical support, including online and telephone resources.
Specifies what parts and services are covered under the limited hardware warranty.
To Next Page
