ATEQ VT36 - Page 23

VT36 TPMS TOOL user guide
UM-36400C-U User manual ATEQ VT36 Page 21/32
1.3. CHANGE FORMAT SETTINGS
SETTINGS
ZONE : EUROPE
UNITS : PSI/°F
> FORMAT : AUTO
BUZZER ON : YES
Scroll up and down to select function
or settings.
Enter settings parameter.
Complete listing.
> AUTO
DECIMAL
HEXADECIMAL
Up or down to select the desired
change.
Press to confirm the change
and return to settings.
Press to return settings
without change.
AUTO: display sensor ID format in the way sensor is transmitting.
DECIMAL: force to display sensor ID in decimal (0 to 9).
HEXADECIMAL: force to display sensor ID in hexadecimal (0 to F).
1.4. CHANGE BUZZER ON SETTINGS
When buzzer on is set to YES, a beep is triggered when the sensor ID is detected.
SETTINGS
ZONE : EUROPE
UNITS : PSI/°F
FORMAT : AUTO
> BUZZER ON : YES
Scroll up and down to select function
or settings.
Enter settings parameter.
Change by YES or NO.
SETTINGS
UNITS : PSI/°F
FORMAT : AUTO
BUZZER ON : NO <
CONTRAST: 80 %
Up or down to select the desired
change.
Press to confirm the change
and return to settings.
Press to return settings
without change.