ATG 429EBP - Units and Accessories Applied

ATG429EBPOperationManual

1‐2
June4,2015
Rev.A2

429 TRANSMITTER:
Bit Rate: 12.5 or 100 kbps +/- 0.5% (selectable)
Pulse Rise/Fall Time: Low Speed -10 +/- 5.0 usec
High Speed -1.5 +/- 0.5 usec
NOTE: Pulse rise and fall times are measured between the
10% and 90% voltage points on the leading and
trailing edges of the pulse.
Pulse Amplitude (Line A to B): HI = +10 +/- 1.0VDC
LO = -10 +/- 1.0VDC
NULL = 0 +/- 0.5VDC
Output Impedance: 75 Ohms (Line A to B) Nominal
Repetitive Word Rate: 4 to 59998 msec
Parity: ODD or EVEN (selectable)
429 RECEIVER:
Voltage Levels (Line A to B): HI +6.5 to +13 VDC
NULL +2.5 to -2.5 VDC
LO -6.5 to -13 VDC
Bit Rate: Low Speed 8 to 20 kbps
High Speed 80 to 125 kbps
Word Rate: ±2 msec. average
Input Impedance: 12K ohms minimum (balanced)
1.4 UNITS AND ACCESSORIES APPLIED
1. ATG Model 429EBP - ARINC 429 Transmitter Receiver JPN 01-1001-12
2. STANDARD Accessory: 110V/60Hz to 9VDC Battery Charger
JPN 15-0009-03
OPTIONAL Accessory: 220V/60Hz to 9VDC Battery Charger
JPN 15-0009-02
3. 429 EBP Operation Manual, JPN E6-1001-13