2221
04
Other safety
instructions
Here is all the additional critical
information that’s a must read
for your safety and to maintain
the health of the Ather Dot™. Go
through them carefully before you
start using it.
The Ather Dot™ - your home charging point,
speaks to you. The changing state of the LED
light communicates to you about how it’s doing.
Every colour tells you something.
Learn its language
Solid amber light
Your home charging point’s software is being
updated over-the-air (OTA)
Solid green light
When not connected to the vehicle - Your home
charging point is healthy and is available for
charging
When connected to the vehicle - Charging is done
Blinking green light
Charging in progress
No light
No power flow
Note: If you don’t see any light (when there is power
in your premises), press Reset Button on PRCD. If
the Ather Dot™ still remains non-functional, please
contact customer support.
Solid red light
A fault has been detected in your home charging
point. Please contact customer support
To Next Page
Loading...