Ather Dot - Warnings!; Caution; Troubleshoot

2423
Warnings!
Daily usage
This device should not be operated by children.
Do not touch the Ather Dot™’s end terminals
with fingers or sharp metallic objects, such as
wire, tools, or needles. No goofing around.
Do not insert foreign objects into any part
of the Ather Dot™.
Use Ather Dot™ only within the specified
operating parameters.
Repair work
Do not attempt to disassemble, repair, tamper
with, or modify the Ather Dot™. It is not user
serviceable. Get in touch with customer support
for any repairs or modification.
Transportation
When transporting the Ather Dot™, handle it with
care. Do not subject it to strong force or impact
or pull, twist, tangle, drag, or step on.
If the LED on the Ather Dot™ shows a solid red
light, switch OFF the power for 10 seconds and
switch it ON again.
If the above step fails to restart the Ather Dot™
even after 3 trials, get in touch with customer
support for further instructions.
Troubleshoot
Caution
Do not use private power generators as a power
source for charging.
Do not operate the Ather Dot™ in temperatures
outside its operating range. Acceptable limits are
mentioned in the product specifications (pg: 8).
Incorrect installation and testing of the Ather
Dot™ could potentially damage either the
vehicle’s battery and/or the Ather Dot™ itself.
Any resulting damage is excluded from the
New Vehicle Limited Warranty and the Charging
Equipment Limited Warranty.
Electrical equipment
Please handle with care.