ATI Technologies X1300 - Radeon 256 MB PCI Express Video Card - Page 78

70 All Settings
Set the Catalyst® A.I. setting
1 From the Tree View pane, expand 3D.
2 Click All Settings.
3 Scroll to Catalyst® A.I.
4 Click the Control slider and move the selector to the left to increase
processing performance, or to the right to increase image quality.
Set the Mipmap detail level
1 From the Tree View pane, expand 3D.
2 Click All Settings.
3 Scroll to Mipmap Detail Level.
4 Click the Control slider and move the selector to the left to increase
processing performance, or to the right to increase image quality.
Set Wait for vertical refresh setting
1 From the Tree View pane, expand 3D.
2 Click All Settings.
3 Scroll to Wait for vertical refresh.
4 Click the Control slider and move the selector to the left to increase
processing performance, or to the right to increase image quality.
Select a SmartShader™ effect
1 From the Tree View pane, expand 3D.
2 Click All Settings.
3 Scroll to SmartShader™ Effects.
4 Select an effect from the drop down-menu.
Note: Effects in the list not supported by Direct 3D® are appended
with “(OpenGL® only)”.
Apply your settings
1 Click Apply to save your changes and leave the Catalyst® Control
Center open.
2 Click OK to save your changes and exit the Catalyst® Control
Center.