Standard Settings 83
• Optionally, select in Theater Mode (full-screen) if you want
the video content to be displayed on both displays. The
Secondary display displays the same content as the primary.
Set video aspect ratio
1 From the Tree View pane, expand Video.
2 Click Theater Mode.
3 Select Match the source video to maintain the aspect ratio of original
video.
• Optionally, select Scale to full-screen to have the source video
fill the display area.
Apply your settings
1 Click Apply to save your changes and leave the Catalyst® Control
Center open.
2 Click OK to save your changes and exit the Catalyst® Control
Center.
Restore default settings
1 Move the mouse to the bottom right-hand corner of the window.
2 Click Defaults.
Note: Clicking Defaults will restore the defaults for the current view
only. Previous settings are not altered and will be saved once you
click OK.
Discard your settings
•Click Discard to ignore any unsaved changes and restore the
settings that existed when the Catalyst® Control Center was
opened or the last time Apply was used. Discard does not close the
Catalyst® Control Center.
Clicking
Discard applies to all features of an aspect, not just the feature in
the current view.
Deinterlacing
Deinterlacing creates a sharp image from the two video fields of interlaced
video. Select one of five options for deinterlacing video for better viewing.
To Next Page
Loading...
