Need help?Do you have a question about the ATIM Cloud Wireless ACW Series and is the answer not in the manual?
Precautions for using devices in potentially explosive environments.
Guidelines for product storage and operation regarding temperature and water resistance.
Information on radio communication bands used by ATIM modems.
Links to Optex documentation for infrared detector configuration and installation.
Details on standby, reception, and emission current consumption for different PIR models.
Information on battery models and attachment methods for PIR devices.
Describes the product's periodic frame transmission for counting detections.
Details how the product transmits a frame upon detecting presence for intrusion alerts.
Instructions on how to power up the PIR device by connecting the battery.
Procedure to trigger a frame to validate network connection by activating the case opening sensor.
Lists different types of frames emitted by the PIR detectors and their purpose.
Details the byte structure and possible values for standard frames, including header and sensor data.
Structure and values for the keep-alive frame, which reports battery status.
Explains how to construct and send downlink frames for LoRa configuration.
Details the byte structure and values for Sigfox downlink frames.
Instructions for reconfiguring the PIR operating mode (Counting/Alarm) using AT commands via LoRa or Sigfox.
To Next Page
General