5
ATIM_ACW-PIR_UG_EN_V1.4
General presentation
The ACW-PIR product line deals with 6 infrared presence detectors.
⚫ ACW-PIR360-I: Ceiling indoor version (360° detection radius)
⚫ ACW-PIR90-I: Wall indoor version (90° detection radius)
⚫ ACW-PIR180-O: Wall outdoor version (180° detection radius)
⚫ ACW-PIR90-O: Wall outdoor version (90° detection radius)
⚫ ACW-ILB30: Outdoor detector « barrier type » range of 30m
⚫ ACW-ILB100: Outdoor detector « barrier type » range of 100m
This user guide presents the installation and configuration of the LoRa or Sigfox radio part of the products. For more
information on how to install the product or configure the infrared detection part, please refer to the Optex
documentation below,
CAUTION: On some products, it is possible via switches to configure the default states of the dry contacts (NO / NC
/ COM). To guarantee the correct functioning of the radio part, do not modify these settings.
a. Optex documentations
This documentation completes this user guide, on the configuration of infrared detectors as well as on the installation
procedure.
To Next Page
Loading...