Atlantic Furniture Mission Printer Stand With Shelf AH10224 User Manual

READY
Page 1 of 3
ASSEMBLY INSTRUCTIONS
Before assembling your printer stand, please read through these
instructions carefully and familiarize yourself with the different parts.
MISSION PRINTER STAND WITH SHELF
Hexagon wrench
A E
D
B
F
C
Flat washer - 8 pcs Wooden Dowel 3/8 X 1 1/4” - 4 pcs
Wooden Dowel 1/4” X 1 1/4” - 4 pcs
Spare - 2 pcs
Spare - 1 pc
Spare - 1 pc
Hexagon Nut - 8 pcs Wood Screw - 6 pcs
Spare - 2 pcs
Spare - 1 pc
Hexagon Wrench - 1 pc
PARTS LIST
01
02
03
04
TOP PANEL 1 PC
4 PCS
2 PCS
1 PC
LEG
SIDE PANEL
LOWER SHELF
01
02
04
03
ATTENTION! If you receive a damaged or defective item,
please contact Atlantic Furniture at
customerservice@atlanticfurniture.com
or 1-800-955-3726
PO :
Adult assemblyAdult assembly
NOTE: WE INCLUDE SPARE HARDWARE IN CASE DAMAGE OCCURS DURING ASSEMBLY.

Atlantic Furniture Mission Printer Stand With Shelf AH10224 Specifications

General

Product Type	Printer Stand
Material	Wood
Style	Mission
Assembly Required	Yes
Category	Indoor Furnishing
Product Name	Mission Printer Stand With Shelf

Summary

Assembly Instructions

Parts Identification

Lists all components and hardware required for assembly, including quantities and spare parts.

Step 1: Attach Legs to Top Panel

Secures the legs to the top panel using washers and hexagon nuts with the provided wrench.

Step 2: Install Dowels

Inserts wooden dowels into the locator holes of the side panels and lower shelf.

Step 3: Attach First Side Panel

Connects the first side panel to the stand, aligning dowels and securing with a wood screw.

Step 4: Attach Second Side Panel and Lower Shelf

Mounts the second side panel and positions the lower shelf, aligning dowels with side panel holes.

Step 5: Secure Lower Shelf

Ensures no gap between the lower shelf and side panel, then secures it with wood screws.