Atlantic Furniture RICHLAND BUNK BED User Manual

Page 1 of 9
BUNK SAFETY WARNING
Size of Mattress and Foundation
The length and width of the upper and lower bunk mattress and foundation are as follows :
Width
37 ½”- 38 ½”
52”- 53”
LengthSize
74”- 75”
74”- 75”
Twin
Full
Thickness
9 ½” max
9 ½” max
You must use only this size mattress.
Ensure thickness of upper and lower mattress and foundation combined does not exceed 9 ½”
and that the mattress is at least 5” below upper edge of guardrails.
This Bunk Bed uses a slat kit for mattress foundation.
Replacement Parts
Replacement parts, including additional guardrails, may be obtained from any
Atlantic Furniture dealer
SAFETY WARNINGS
! !
( 1 )
( 2 )
( 3 )
( 4 )
( 5 )
( 6 )
( 7 )
( 8 )
( 9 )
(10)
(11)
(12)
(13)
Follow the information on the warnings appearing on the upper bunk end structure
and on the carton. Do not remove warning label from bed.
Always use the recommended size mattresses or mattress support, or both,
to help prevent the likehood of entrapment or falls.
Surface of mattress must be at least 5 in. (127mm) below the upper edge of guardrails.
Do not allow children under 6 years of age to use the upper bunk.
Periodically check and ensure that the guardrail, ladder, and other component are
in their proper position, free from damage, and that all connectors are tight.
Do not allow horseplay on or under the bed and prohibit jumping on the bed.
Always use ladder for entering or leaving upper bunk.
Do not use substitute parts. Contact the manufacturer or dealer for replacement parts.
Use of a night light may provide added safety precaution for a child using the upper bunk.
Always use guardrails on both long sides of the upper bunk. If the bunk bed will be placed
next to the wall, the guardrail that runs the full length of the bed should be placed against
the wall to prevent entrapment between the bed and the wall.
The use of water or sleep flotation mattresses is prohibited.
STRANGULATION HAZARD : Never attach or hang items to any part of the bunk bed
that are not designed for use with the bed; for example, but not limited to, hooks, belts
and jump ropes.
Keep these instructions for future reference.

Atlantic Furniture RICHLAND BUNK BED Specifications

General

Brand	Atlantic Furniture
Model	RICHLAND BUNK BED
Category	Indoor Furnishing
Language	English

Summary

Bunk Bed Specifications and Safety

Mattress and Foundation Requirements

Specifies the correct mattress and foundation dimensions, ensuring safe use and guardrail clearance.

Replacement Parts Availability

Information on how to obtain replacement parts for the bunk bed from authorized dealers.

Critical Safety Warnings

Essential safety guidelines and warnings to prevent injury, including entrapment and fall hazards.

Product Components and Tools

Required Tools for Assembly

Lists the necessary tools, such as Phillips head screwdriver and Allen wrench, for assembling the bunk bed.

Hardware Identification Guide

Detailed identification of all included hardware, screws, nuts, and brackets with quantities.

Comprehensive Parts List

An organized list of all individual parts of the bunk bed, identified by numbers and names.

Step-by-Step Assembly Instructions

Assembling the Upper Frame

Instructions for attaching long rails to upper panels and securing the 3/4 guard rail.

Installing Slat Kits and Guard Rails

Steps for placing twin slat kits and installing guard rail assemblies onto the upper bunk.

Connecting Posts and Lower Structure

Guidance on attaching posts to short rails and connecting the lower panel extension assembly.

Securing Lower Frame and Slat Kit

Steps to attach long rails to the lower panel assemblies and install the full lower bunk slat kit.

Joining Bunk Sections and Ladder

Instructions for connecting upper and lower panels using metal pins and assembling ladder components.

Final Assembly and Safety Checks

Completing ladder installation and performing final checks for secure assembly before use.