Atlantic alfea S S5 User Manual

Installation and
operating manual
intended for professionals
To be saved for
future consultation
Heat pump air/water
split single service
Document n° 1303-16 ~ 18/03/2011
alféa S
www.atlantic.fr
Subject to modications without notice.
Non contractual document.
model S5
model S6
model S8
model S10
model S13
model S16
FR EN IT NL DE
ES PT

Atlantic alfea S S5 Specifications

General

Brand	Atlantic
Model	alfea S S5
Category	Heat Pump
Language	English

Summary

2 Installation

2.1 Regulation installation and maintenance conditions

Requirements for professional installation and maintenance compliance.

2.4 Installation of the outside unit

2.5 Installing the hydraulic module

2.6 Refrigeration connections

Rules, precautions, and procedures for connecting refrigeration pipes.

2.7 Filling the installation with gas

Steps for vacuum creation, gas filling, and sealing tests.

2.8 Connecting the heating circuit hydraulically

Procedures for connecting heating pipes and filling the system.

2.9 Electrical connections

Guidelines for electrical connections, cable sizes, and diagrams.

3 Regulation system

3.3 Temperature control

3.4 Parametering the setting

Guide to configuring parameters and settings for the heat pump.

5 Electrical wiring diagrams

Electrical wiring of outside unit (model S5, S6, S8)

Wiring diagram for the outside unit components.

Electrical wiring of outside unit (model S10)

Electrical wiring of outside unit (model S13)

Electrical wiring of outside unit (model S16)

Electrical wiring, Hydraulic module (Except installer's connections)

6 Troubleshooting

6.1 Faults displayed on hydraulic module

Identifies errors displayed on the hydraulic module's interface.

6.2 Faults displayed on the outside unit

Lists error codes indicated by diode flashes on the outside unit.