Atlantic Alfea Series User Manual

Operation manual
intended for professionals
and end users.
To be saved for
future consultation
Heat pump air/water
split, single service
Alféa S
www.atlantic.fr
Subject to modications without notice.
Non contractual document.
Document n° 1328-12 ~ 13/09/2010
alféa S13
alféa S16
alféa S5
alféa S6
alféa S8
alféa S10
FR EN IT NL DE
ES PT

Atlantic Alfea Series Specifications

General

Brand	Atlantic
Model	Alfea Series
Category	Heat Pump
Language	English

Summary

Instructions to be read before using the equipment

Safety instructions

Covers safety during start-up, use, and maintenance. Warns against electrical hazards, improper repair, and obstruction of airflow.

Precautions and warnings regarding your installation

Details precautions for outdoor unit, hydraulic unit, control system, fan convectors, radiators, floor heating, and DHW.

Overall view of the installation

Operation of the installation

User interface and room control unit (option)

Explains the components and basic functions of the user interface, room control unit, and room thermostat.

Appliance start up

Quick start-up

Programming examples

Structure of the "End user" control menu

Parametering the setting

General and Setting Parameters

Explains end-user parameter accessibility and the process of navigating menus to adjust settings.

End User Settings: Date, Time, Language, and Programs

Lists configurable settings for Date/Time, Language, and Heating programs for Circuit 1, including default values.

Heating and DHW Programs

Details configurable heating time programs for Circuit 2, DHW programs, and cooling programs, including pre-selection and phase timings.

Holiday Settings and Circuit Setpoints

Covers holiday period settings for heating circuits, comfort/reduced/frost protection setpoints for heating and cooling, and DHW nominal setpoint.

Diagnostics and Consumer Settings

Details diagnostic parameters for heat generation and consumers, including temperatures, setpoints, and modulation, plus swimming pool settings.

Information display

Details

Operation of the DHW system

Selecting cooling mode

Configuring room control unit (Option)

Maintenance

Checking that the floor system is full

Specifies the required pressure (1.5 bars) for the floor system and advises on checking for leaks if refilling is frequent.

Checking the outdoor unit

Instructs to dust the heat exchanger carefully and ensure air passage is unobstructed, being mindful of the fins.

Checking the refrigeration circuit

Mandates an annual check of the refrigeration circuit by approved service for models with over 2kg refrigerant charge.