Line Function
Setting range
or display
Setting
increment
Basic
setting
Heating time program, circuit 2
If the installation consists of 2 heating circuits (Only with the 2nd circuit kit option).
520 Pre-selection (day / week)
Mon-Sun Mon-Fri Sat-Sun Monday Tuesday…
Mon-Sun
521 1st phase On (start) 00:00... --:-- 10 min 6:00
522 1st phase Off (end) 00:00... --:-- 10 min 22:00
523 2nd phase On (start) 00:00... --:-- 10 min --:--
524 2nd phase Off (end) 00:00... --:-- 10 min --:--
525 3rd phase On (start) 00:00... --:-- 10 min --:--
526 3rd phase Off (end) 00:00... --:-- 10 min --:--
536 Default values, Circuit 2 No, Yes No
Yes + OK: The default values memorised in the regulator replace and cancel the customised heating programmes.
Your customised settings are therefore lost.
Time program 4 / DHW
If the installation is tted with a DHW tank. (Only with the DHW kit option).
560 Pre-selection (day / week)
Mon-Sun Mon-Fri Sat-Sun Monday Tuesday…
Mon-Sun
561 1st phase On (start) 00:00... --:-- 10 min 00:00
562 1st phase Off (end) 00:00... --:-- 10 min 05:00
563 2nd phase On (start) 00:00... --:-- 10 min --:--
564 2nd phase Off (end) 00:00... --:-- 10 min --:--
565 3rd phase On (start) 00:00... --:-- 10 min --:--
566 3rd phase Off (end) 00:00... --:-- 10 min --:--
576 Default values No, Yes No
Yes + OK: The default values memorised in the regulator replace and cancel the customised heating programmes.
Your customised settings are therefore lost.
Time program 5 / Cooling
If the installation is tted with the cooling kit (Only with the cooling kit option).
600 Pre-selection (day / week)
Mon-Sun Mon-Fri Sat-Sun Monday Tuesday…
Mon-Sun
601 1st phase On (start) 00:00... --:-- 10 min 8:00
602 1st phase Off (end) 00:00... --:-- 10 min 20:00
603 2nd phase On (start) 00:00... --:-- 10 min --:--
604 2nd phase Off (end) 00:00... --:-- 10 min --:--
605 3rd phase On (start) 00:00... --:-- 10 min --:--
606 3rd phase Off (end) 00:00... --:-- 10 min --:--
616 Default values No, Yes No
Yes + OK: The default values memorised in the regulator replace and cancel the customised heating programmes.
Your customised settings are therefore lost.
Operation manual "1328 - EN"
Split system
- 12 -