Need help?Do you have a question about the Atlantic Alfea Excellia HP Duo A.I. Series and is the answer not in the manual?
General| Category | Heat Pump |
|---|---|
| Refrigerant | R32 |
| Application | Residential |
| Technology | Inverter |
| Model Series | Alfea Excellia HP Duo A.I. |
| Heating Capacity | Up to 16 kW |
| Cooling Capacity | Up to 16 kW |
| Energy Efficiency Class (Cooling) | A++ |
| Noise Level (Outdoor Unit) | 45 dB(A) |
| Operating Temperature Range (Heating) | -20°C to +35°C |
| Operating Temperature Range (Cooling) | +10°C to +46°C |
| Integrated Hot Water Tank Capacity | 190 liters |
Appliance installation and maintenance must follow regulations and codes of practice.
Ensuring proper hydraulic connections according to industry standards and regulations.
Guidelines for bending, shaping, and installing refrigeration pipes, including minimum length.
Precautions and recommendations for installing the outdoor unit, including clearances.
Precautions and space requirements for installing the hydraulic unit.
Essential rules for handling refrigerants and making connections, including tool requirements.
Steps for checking gas and liquid connections, ensuring cleanliness and proper sealing.
Recommended method for creating a vacuum in the refrigeration circuit, especially in cold conditions.
Procedure for testing the refrigeration circuit for leaks using nitrogen pressure.
Steps for achieving the required vacuum level in the refrigeration circuit.
Instructions for filling the system with refrigerant and calculating additional amounts.
Steps for flushing the heating system and connecting the hydraulic unit.
Procedure for filling and bleeding air from the hydraulic circuit.
Details electrical connection points and wiring for the outdoor unit.
Details electrical connection points and wiring for the hydraulic unit.
Step-by-step guide for initial appliance setup via the 'Easy Start' function.
Configuration of temperature control based on dwelling insulation and radiators.
Adjusting temperature control using flow temperature or gradient methods.
List of errors related to hydraulic unit components, their causes, and proposed actions.
List of errors related to outdoor unit components, their LED indicators, and designations.
Procedures for checking hydraulic system pressure, safety valves, and distribution valves.
A checklist of essential checks before starting the hydraulic unit and appliance.
Steps for starting the heat pump after installation, including configuration and checks.
To Next Page