To Next PageTo Next Page
Need help?Do you have a question about the Atlantic Alfea Extensa A.I. and is the answer not in the manual?
Guidelines for safely transporting and handling the outdoor unit to prevent damage.
Precautions to prevent contamination of refrigeration circuits and ensure system reliability.
Requirements for making hydraulic connections, including material and sealing practices.
Essential principles for making electrical connections, including polarity and grounding.
Procedure for connecting wires to screw terminals, emphasizing proper loop formation.
Instructions for connecting components to the controller boards via connectors.
Method for connecting wires to spring terminals, ensuring secure grip.
Details on the packaging of the heat pump outdoor and hydraulic units.
Instructions for checking the appliance appearance and condition upon delivery.
Glossary of terms used in the manual, such as 'Split' and 'Air/water'.
Guidelines for installing refrigeration pipes, including bending and minimum length.
Precautions and clearances required for installing the outdoor unit.
Precautions and mounting instructions for installing the hydraulic unit.
Essential rules and precautions for making refrigeration connections and handling refrigerants.
Proper techniques for bending and flaring refrigeration pipes to avoid damage.
Procedures for checking refrigeration connections and ensuring gas-tightness.
Steps for filling the system with refrigerant, including vacuum creation and seal tests.
Instructions for connecting the hydraulic unit to the central heating system.
Procedure for rinsing the heating system before connecting the hydraulic unit.
Requirement for minimum water volume in the heating system and buffer tank considerations.
Steps for filling the hydraulic circuit with water and bleeding air.
Specifications for cable sizes and circuit breaker ratings for power supply.
Accessing and making electrical connections on the outdoor unit's terminal block.
Making electrical connections on the hydraulic unit's terminal blocks.
Quick start function for initial appliance settings like language, date, and power.
Description of the main controller display and navigation buttons.
Explanation of the symbols and information shown on the controller display.
Procedure to access the installer-specific menu for advanced settings.
Guide on how to move through the controller's menu structure.
Steps to change appliance settings using the controller's interface.
Configuration of heating circuit water temperature setpoint based on outdoor conditions.
Overview of the hierarchical structure of the controller's menu options.
Configuration of installed accessories and features like backup heater and circuits.
Settings related to heating and cooling zones, including radiator types.
Configuration options for domestic hot water production, including temperature and anti-legionella.
Detailed configuration settings for compressor, heating/cooling, and DHW functions.
Monitoring active functions, control panel status, and error logs.
Accessing special functions like floor drying, emergency mode, and relay tests.
Configuration of appliance settings such as date, time, language, and menus.
Guided setup process for initial configuration of the heat pump.
Diagram illustrating a basic hydraulic layout for a single heating circuit.
Diagram for a layout with one heating circuit and a domestic hot water tank.
List of error codes and probable causes for faults occurring in the hydraulic unit.
List of error codes and designations for faults detected in the outdoor unit.
Periodic checks for leaks, pressure, and safety valve operation in the hydraulic system.
Maintenance tasks for the outdoor unit, including cleaning and fan checks.
Inspection of electrical connections, cables, and plates for safety and proper function.
Procedure for draining water from the hydraulic unit and installation.
Information on the correct installation and operation of the distribution valve.
Comprehensive checklist for pre-installation checks before system startup.
Steps for initial startup, including controller setup and system checks.
Explanation of the Energy-related Products (ErP) directives and their purpose.
Technical data and performance figures for the heat pump models according to ErP standards.
Guidelines for the proper dismantling, recycling, and disposal of the appliance.
General