Atlantic CMG-BD0 - Model Specifications; Warranty Information

EN
8
MODEL SPECIFICATIONS
Model identifier(s): Convectors CMG-BD0, CMG-BD0/M, CMG-BD0/PR, CMG/BD0/PW
Item
Symbol
Value
Unit
Heat output
Nominal heat output
P nom
0,5 – 2,5
kW
Minimum heat output (indicative)
P min
0,5
kW
Maximum continuous heat output
P max, c
2,5
kW
Auxiliary electricity consumption
At nominal heat output
el max
0,000
kW
At minimum heat output
el min
0,000
kW
In standby mode
el SB
0,000
kW
0,397
W
Item
Unit
Type of heat output / room temperature control
Electronic room temperature control plus week timer
Yes
Other control options
Room temperature control, with presence detection
No
Room temperature control, with open window detection
Yes
With distance control option
No
With adaptive start control
Yes
With working time limitation
No
With black bulb sensor
No
Contact details
ATL International
Tel: (+33)146836001
58 avenue du General Leclerc
92340 Bourg-la-Reine (FRANCE)
WARRANTY
KEEP THIS DOCUMENT IN A SAFE PLACE
(This certificate should only be presented if you are making a complaint)
- This warranty is applicable for 2 years from the date of installation or purchase and is
valid for no more than 30 months from the date of manufacture in the absence of
additional supporting documents
- The warranty covers the replacement or supply of parts in return for those found
defective and does not provide for any compensation for damages.
- Labor costs, travel and transportation are under responsibility of the user
- Damage associated with improper installation, power supply network that does not
meet the standards, improper use or failure to follow the instructions in the manual is
not covered by the warranty.
- This certificate should be presented only when filing a complaint with the distributor or
installer, along with the seller’s invoice.
- To apply for warranty service, please contact your distributor or installer. If necessary,
you can also contact: ATL International: Tel: (+33)146836001, 58 avenue du General
Leclerc 92340 Bourg-la-Reine (FRANCE).
Type of Device
Serial Number
Name and address of the customer
INSTALLER’S STAMP