Atlantic CMG-BD0 - Expert Menu Options; Temperature Calibration; Maximum Temperature Setting

EN
7
EXPERT MENU
To access the advanced functions of the device, press and hold 2 buttons
around 3 seconds.
Exit expert menu
Calibration
It is possible to adjust the temperature
measured by the appliance according to the
room temperature. The calibration value is from
-3°C to +3°C comparing to the temperature
shown on the screen.
Maximum temperature
It is possible to change the temperature, which
cannot be exceeded (from 19°C to 28°C).
By default, the maximum temperature is 28°C.
Heating indicator
It is possible to switch off the heating indicator,
when appliance is in standby mode.
To switch off the indicator, choose parameter
«oF»
Screen
It is possible to choose which temperature to
show on the screen before switching to standby
mode:
- «St» to show the set temperature;
- «Pt» to show the measured temperature.
Factory settings
It is possible to reset appliance to factory
settings. Choose parameter «Go».
Comfort mode, temperature set-point 19°C,
Programming by default.
Exit expert menu