To Next PageTo Next PageWhat to do if Atlantic Water Heater does not heat or steam is released from the Pressure Temperature Relief valve?
If your Atlantic Water Heater isn't heating or steam is escaping from the Pressure Temperature Relief valve, immediately switch off the electric power supply and contact your reseller.
What to do if I see Error 9 on my Atlantic Water Heater: Relay or PCB fault?
If your Atlantic Water Heater displays Error 9, indicating a Relay or PCB fault, you should change the PCB.
How to fix Error 3 (Probe fault) on Atlantic Water Heater?
If your Atlantic Water Heater displays Error 3, which indicates a probe fault, you should change the probe.
General| Power | 2250 W |
|---|---|
| Voltage | 230 V |
| ErP class | B |
| Type | Electric water heater |
| Frequency | 50 Hz |
| Thermal insulation | High-density polyurethane foam |
| Protection | IP 24 |
| Installation | Vertical wall-mounted |
| Heating element | Steatite |
| Capacity | 100 liters |
Details for cold water supply and connection.
Details for hot water supply and connection.
Information on the thermal safety cut-out mechanism.
Identifies error code 3 for probe malfunction.
Identifies error code 9 for relay or PCB issues.
