To Next PageTo Next PageWhat to do if my Atlantic Water Heater shows Error 9: Relay or PCB fault?
If your Atlantic Water Heater displays Error 9, indicating a relay or PCB fault, the suggested solution is to change the PCB.
General| Brand | Atlantic |
|---|---|
| Model | VERTIGO 821359 |
| Type | Electric Water Heater |
| Power | 2250 W |
| Voltage | 230 V |
| Energy class | B |
| ErP | Yes |
| Width | 490 mm |
| Depth | 290 mm |
| Mounting | Wall-mounted |
| Frequency | 50 Hz |
Description of the digital screen, mode selection knob, and operational indicators (A-G).
Guidelines for use by persons with disabilities and supervision requirements for children.
Recommendations for suitable installation locations, including frost protection, ventilation, and bathroom volume rules.
Advice on using specific pipe materials and the recommendation for thermostatic regulators with PER pipes.
Guidance on physically attaching the water heater unit to the wall or mounting structure.
Instructions for connecting water inlet and outlet pipes, including material recommendations and safety devices.
Steps for wiring the water heater, emphasizing safety, grounding, and circuit protection requirements.
Details on operating modes (Frost Free, Manual, Smart, Boost) and interface indicators like shower display and power.
Routine checks and actions the user should perform monthly to ensure proper function and prevent damage.
Tasks requiring professional intervention, including scaling removal, anode replacement, and heating element service.
