To Next PageTo Next PageWhat to do if Atlantic Vertigo 50 Water Heater does not heat or steam is released from the Pressure Temperature Relief valve?
If your Atlantic Water Heater isn't heating or steam is escaping from the Pressure Temperature Relief valve, immediately switch off the electric power supply and contact your reseller.
What to do if I see Error 9 on my Atlantic Vertigo 50: Relay or PCB fault?
If your Atlantic Water Heater displays Error 9, indicating a Relay or PCB fault, you should change the PCB.
How to fix Error 3 (Probe fault) on Atlantic Water Heater?
If your Atlantic Water Heater displays Error 3, which indicates a probe fault, you should change the probe.
General| Capacity | 50 liters |
|---|---|
| Power | 2250 W |
| Voltage | 230 V |
| ErP class | B |
| Frequency | 50 Hz |
| Thermostat | Electronic |
| Protection | IP 24 |
| Installation | Multi-position (vertical or horizontal) |
Details the different operational modes like Frost Free, Manual, Smart, and Boost.
Explains the function of the knob used to select operating modes.
Describes the digital display indicating hot water availability.
Explains the light indicating the unit is connected to power.
Recommendations on avoiding placement of combustible materials near the heater.
Guidelines for connecting water pipes, including pressure limiting valves.
Tasks requiring a qualified technician, like scale removal and anode replacement.
Step-by-step instructions for safely draining the water heater tank.
Lists common parts that can be replaced, like thermostats and elements.
Requirement for installation to meet local plumbing and electrical standards.
Specifies requirements for licensed electricians and plumbers.
Mandates regular operation and maintenance for warranty validity.
Outlines the duration of warranty for the tank, elements, and labour.
Details how the warranty starts and its validity period.
Excludes damage from impacts, falls, or handling after factory.
Excludes issues arising from high pressure or faulty plumbing/electrical supply.
Excludes warranty if a 500 kPa pressure limiting valve is not fitted.
Excludes damage from misuse, accidents, acts of God, or incorrect installation.
