To Next PageTo Next PageWhat to do if my Atlantic Zeneo 50 Water Heater is rapidly flashing green?
If your Atlantic Water Heater is showing a rapid green flashing light every second, it indicates an issue that requires professional attention. It is recommended to contact your installer or customer service for assistance.
General| Brand | Atlantic |
|---|---|
| Model | Zeneo 50 |
| Category | Water Heater |
| Language | English |
Safety precautions and general installation guidelines for the water heater unit.
Details on connecting the water heater to the electrical supply, including safety requirements.
Technical specifications and dimensions for VM vertical wall-mounted water heaters.
Technical specifications and dimensions for Compact range water heaters.
Technical specifications and dimensions for VS vertical water heaters on pedestals.
Technical specifications and dimensions for HM horizontal water heaters.
Description and image of a dielectric fitting accessory.
Details and benefits of the universal pedestal for water heater installation.
Description of the kit for converting a water heater to three-phase power.
Information on a universal mounting bracket for water heaters, emphasizing ease of installation.
Details about a strap kit for ceiling mounting, including distance specifications.
Description of a spacer for vertical pedestal models to create clearance.
Guidance on installing VM models, including wall types and fixing methods.
Advice on using a pedestal when the wall cannot support the water heater's weight.
Instructions for installing VS models on the ground with shoes.
Specific installation notes for HM models, emphasizing vertical orientation of connections.
How to identify cold water inlet and hot water outlet piping on the appliance.
Details on connecting tubing, safety devices, and material compatibility for water connections.
Recommendations on temperature limiting devices and water treatment for hard water areas.
Recommendations for electrical connections, including cable types and earthing.
Step-by-step guide for connecting the VM 50 litre model.
Step-by-step guide for connecting VM 75 to 200 litre models.
Step-by-step guide for connecting VS models.
Procedure for filling the water heater and checking its operation.
Steps to fill the water heater correctly with water.
How to verify the water heater is functioning properly after installation.
GIFAM recommendations regarding mechanical risks, handling, location, and positioning.
GIFAM recommendations concerning electrical risks, connections, and safety.
GIFAM recommendations on hydraulic risks, pressure, and connections/drains.
User-level maintenance tasks like operating the safety unit and checking the lamp.
Procedure for draining the water heater, especially for hard water or frost protection.
Identification of components for VM models (75 to 200 litres).
Identification of components for VM models (50 litres).
Procedure for servicing the water heater for vertical wall-mounted models.
Procedure for servicing VS and HM models.
Guide to interpreting the control lamp status for troubleshooting user issues.
Troubleshooting error code 1 (faulty battery) indicated by lamp flashes.
Troubleshooting error code 3 (faulty control probe) indicated by lamp flashes.
Troubleshooting error code 7 (heating when dry or faulty corrosion protection).
Instructions on how to test the control probe using an ohmmeter and temperature chart.
Details on what is covered and excluded by the product guarantee.
Conditions that are not covered by the guarantee, such as environmental damage.
Reasons for guarantee voidance related to improper maintenance or unauthorized modifications.
Information on available replacement parts and how to order them.
GIFAM recommendations on the intended use and abnormal use of the appliance.
GIFAM recommendations for periodic maintenance and safety checks.
GIFAM recommendations against unauthorized modifications to the appliance.
Instructions for safe disposal and recycling of the appliance at the end of its life.
