To Next PageTo Next PageWhat to do if Atlantic Vertigo 80 does not heat or steam is released from the Pressure Temperature Relief valve?
If your Atlantic Water Heater isn't heating or steam is escaping from the Pressure Temperature Relief valve, immediately switch off the electric power supply and contact your reseller.
What to do if I see Error 9 on my Atlantic Vertigo 80: Relay or PCB fault?
If your Atlantic Water Heater displays Error 9, indicating a Relay or PCB fault, you should change the PCB.
How to fix Error 3 (Probe fault) on Atlantic Vertigo 80?
If your Atlantic Water Heater displays Error 3, which indicates a probe fault, you should change the probe.
Provides essential information for installing and operating the water heater.
Details on connecting the cold water supply and required valves.
Guidelines for the hot water outlet, including tempering valve requirements.
Instructions for electrical wiring, safety devices, and grounding.
Explanation of the thermal cut-out safety feature and its reset procedure.
Guidance on selecting operating modes like Frost Free, Manual, Smart, and Boost.
Explanation of the digital screen, shower display, and power indicator.
Identifies common error codes displayed by the appliance and their solutions.
Covers mounting, clearances, and compliance with standards.
Steps for filling, checking for leaks, and initial startup.
Procedure for flushing sediment and draining the water heater.
Routine maintenance tasks for users and qualified persons, including PTR valve checks.
Lists common parts that can be replaced, such as elements and seals.
Details terms, exclusions, and coverage periods for the product warranty.
Outlines actions that void the warranty and specific exclusion clauses.
Specifies water quality parameters that may affect warranty coverage.
The Atlantic VERTIGO electric water heater is designed for indoor installation and features an enamelled steel tank, ensuring durability and efficient water heating. This documentation provides essential information for its installation, operation, and maintenance, specifically for horizontal installations where the hot and cold water outlets must be at the side.
The VERTIGO electric water heater is designed to provide hot water for various domestic needs, including kitchen, laundry, and bathroom use. It operates by heating water stored in its enamelled steel tank using an electric heating element. The device offers multiple operating modes to optimize energy consumption and user comfort.
The core function of the water heater is to heat and store water at a user-selected temperature or automatically adjust based on usage patterns. It incorporates a PTR (Pressure Temperature Relief) valve and a Pressure Limiting Valve to ensure safe operation by managing internal pressure and temperature. The system includes both hot and cold water connections, with specific requirements for the installation of non-return and isolating valves, as well as a line strainer, to maintain water quality and system integrity.
The water heater is equipped with a digital screen and a mode selection knob, allowing users to choose from various operating modes:
A shower display indicates the quantity of hot water available, and a blinking shower symbol signifies that hot water is currently being produced (heating in progress). A power indicator light illuminates when the water heater is connected to the power supply.
Before initial use, it is crucial to fill the tank completely. This involves opening the hot water taps to bleed air from the pipes and then filling the appliance with water. Once filled, the tightness of all tubes and the flange seal under the plastic cover should be checked. Any leaks should be moderately tightened. The operation of the hydraulic components and the safety valve must also be verified.
Upon powering on, water may drip from the drain after 15 to 30 minutes, depending on the device's capacity. This is a normal occurrence due to water expansion during heating. Connection leaks and seals should be checked again. During heating, and depending on water quality, the hot water tanks may produce a bubbling noise, which is normal and does not indicate a defect.
The water heater is designed for indoor installation only and must be fixed to the ground using the provided attachments, complying with relevant building codes and seismic restraint requirements. Adequate clearance must be maintained around the unit for service and replacement of components such as cold water inlet piping devices, the PTR valve, tempering valves (if fitted), elements, and thermostats. The PTR valve requires approximately 150 mm for withdrawal.
Regular maintenance is essential to ensure the longevity and safe operation of the Atlantic VERTIGO water heater.
The use of genuine manufacturer's parts is required for warranty purposes when replacing components such as the thermostat, seals, heating element, boiler shell, indicator light, magnesium anode, and connection cable.
General| Brand | Atlantic |
|---|---|
| Model | Vertigo 80 |
| Category | Water Heater |
| Language | English |
