What to do if the 2e zone sensor is not configured on my Atlantic WOYG140LCTA (if 2nd circuits kit)?
- Cchristopher53Aug 3, 2025
If the 2e zone sensor is not configured, set the parameter 5700 to 2, 4 or 6.
What to do if the 2e zone sensor is not configured on my Atlantic WOYG140LCTA (if 2nd circuits kit)?
If the 2e zone sensor is not configured, set the parameter 5700 to 2, 4 or 6.
Provides guidelines on manipulating pipes, using protective caps, and connecting refrigerant lines.
Outlines precautions for outdoor unit placement, including clearances and environmental considerations.
Covers installation precautions, location, and mounting of the hydraulic unit.
Covers connecting central heating pipes, union connectors, and checking system pressure.
Guides on checking connections, filling the system, and purging air from the hydraulic circuit.
Guides on accessing terminals and making connections to the outdoor unit's terminal block.
Explains connections to the hydraulic unit, including back-ups, boiler connection, and external faults.
Details how to connect and configure a room thermostat for heating zone selection and setting parameters.
Guides on setting language, allocating room control units to heating circuits, and configuring functions.
Discusses parametering temperature control according to emitters and insulation, including slope and offset adjustments.
Guides users through navigating menus, selecting parameters, and adjusting settings via the control interface.
Lists error numbers, descriptions, locations, and operational impact of faults shown on the hydraulic unit display.
Describes how faults are coded by LED flashes on the outdoor unit and lists error contents.
Lists pre-start checks for sight, hydraulics, refrigerant connections, and electrical systems.
Details the steps for powering on the unit, configuring settings, and performing initial checks.
Presents detailed ErP performance data, energy classes, and acoustic values for various models.