To Next PageTo Next Page
Need help?Do you have a question about the Atlantic WOYK140LCTA and is the answer not in the manual?
Identifies and describes key components of the outdoor unit.
Details on installing refrigerant connections and the main units.
Guidance on optimal placement and condensate drainage for the outdoor unit.
General safety, tools, and pipe preparation for refrigerant handling.
Procedure for checking and securely connecting refrigerant lines.
Procedures for vacuum pump calibration and the 3-empty method.
Procedure to test the refrigerant circuit for leaks.
Steps for filling, leak testing, and adding refrigerant.
Procedure for collecting refrigerant from the outdoor unit.
Steps to create a vacuum in the refrigerant circuit.
Connecting to the domestic water circuit and condensate drain.
Step-by-step instructions for filling and draining the system.
Best practices for connecting wires to terminals and boards.
A diagram showing the overall electrical connection scheme.
Recommended cable sizes and circuit breaker ratings.
Steps to access and secure electrical connections on the 3-phase outdoor unit.
Guidance on installing and connecting the outdoor temperature sensor.
Preliminary checks to ensure proper setup before starting.
The main procedure for starting and configuring the heat pump.
Steps for configuring room thermostats.
Steps for configuring room control units.
How faults are displayed on the outdoor unit.
Comprehensive checklist of pre-start inspections for all system components.
Detailed steps for starting the unit and performing initial operational checks.
A checklist for the final technical commissioning of the system.
General