To Next PageTo Next PageWhat to do if my Atlantic WOYK160LCT shows error on current sensor?
If your Atlantic Heat Pump displays an error on the current sensor, press the button to obtain the details of the origin of the fault.
What to do if my Atlantic Heat Pump shows error in position of the compressor rotor?
If your Atlantic Heat Pump displays an error in the position of the compressor rotor or on compressor start up, press the button to obtain the details of the origin of the fault.
Lists technical specifications and performance data of the heat pump.
Explains the fundamental operating mechanism of the heat pump.
Outlines regulations for installation and maintenance by certified professionals.
Emphasizes preventing contamination in refrigerant circuits for reliability.
Guides the choice of optimal placement for outdoor and hydraulic units.
Covers precautions and clearances for installing the outdoor unit.
Details precautions for installing the hydraulic unit, focusing on safety and access.
Covers essential rules and precautions for handling refrigerants and connections.
Guides on creating proper flare connections for refrigeration pipes.
Details the procedure for connecting flared pipe connections, including torque.
Outlines procedures for filling the installation with refrigerant gas.
Outlines the initial steps for commissioning the heat pump after installation.
Details the procedure for performing a sealing test on the refrigeration circuit.
Covers general principles and regulations for hydraulic connections.
Details the electrical supply characteristics and warning for proper connection.
Outlines the steps for initial commissioning and setting adjustments of the heat pump.
Outlines the procedure for choosing and adjusting parameters.
Lists error codes and descriptions for faults occurring on the hydraulic unit.
Lists error codes indicated by diode flashes on the single-phase outdoor unit.
Lists error codes indicated by diode flashes on the 3-phase outdoor unit.
Lists checks to perform before starting up the heat pump installation.
Provides a quick start-up sequence for initial operation.
A reference sheet listing all configurable parameters and their settings.
General