Atlas Copco AME 600

EC Declaration of Conformity
EC Declaration of Conformity
We, Construction Tools PC AB, hereby declare that the machines listed below conform to the provisions of EC
Directive 2006/42/EC (Machinery Directive), 2006/95/EC (Low voltage), 2004/108/EC (EMC) and the harmonised
standards mentioned below.
Weight(kg)Speed at full load (min-1)Input power (kW)Drive unit
1.930000.6AME 600
Following harmonised standards were applied:
♦
EN607451-1
♦
EN60745-2-12
♦
EN12649
Technical Documentation authorised representative:
Peter Karlsson
Construction Tools PC AB
Box 703
391 27 Kalmar
Sweden
Vice President Design and Development:
Erik Sigfridsson
Manufacturer:
Construction Tools PC AB
Box 703
391 27 Kalmar
Sweden
Place and date:
Kalmar, 2012-06-01
© 2015 Construction Tools PC AB | No. 9800 1191 01 | 2015-03-04
Original instructions
18
AME 600Safety and operating instructions