Need help?Do you have a question about the Atlas Copco Tensor STB and is the answer not in the manual?
General| Brand | Atlas Copco |
|---|---|
| Model | Tensor STB |
| Category | Power Tool |
| Language | English |
Explains RF exposure from the Tensor STB tool and its components.
Details the system and tool functionalities of the Tensor STB.
Provides technical specifications for the Tensor STB tool, including memory and battery.
Details the storage capacity for tightenings and jobs on the STB tool.
Describes the Lithium-Ion battery used in the Tensor STB tool and its performance.
Explains the Industrial Radio Communication (IRC) technology used by the STB tool.
Guides on setting up the Power Focus system and connecting hardware components.
Details the setup for IRC-W infrastructure, IRC-B, or IRC-W ad-hoc connections.
Instructions for connecting the Serial Port Adapter to the Power Focus.
Guidance on optimal placement of antennas for IRC communication.
Ensures the tool battery is charged before proceeding with setup.
Steps for programming the Power Focus via ToolsTalk or Power Focus Graph.
Configures how the tool communicates, specifying the connection type.
Configuration steps for connecting the tool using IRC-B communication.
Setup for IRC-W connection in infrastructure mode, including network settings.
Steps for setting up IRC-W in ad-hoc mode, including channel selection.
Procedure for pairing the tool with the Power Focus for wireless connection.
How to view radio diagnostics like response time and RSSI in ToolsTalk.
Instructions for configuring the tool to operate in standalone mode.
Initial steps to set up the STB power tool for standalone operation.
Programming the ST selector for use in standalone mode.
Connects the tool to a PC via docking station for configuration and service.
Configures various radio parameters and settings within ToolsTalk Power Focus.
Explains batch count functionality and exceptions in standalone mode.
Detailed list of relevant parameters for Tensor STB tools and their default setup.
Details available digital outputs and how to set them up for Tensor STB.
Lists and describes Power Focus event codes associated with the STB tool.
Instructions for setting up the Tensor STB docking station.
Hardware setup steps for connecting the docking station to a PC.
Connects older STB32 tools using a serial port adapter and IRC-B module.
Instructions for setting up a direct Ethernet connection between PC and Power Focus.
Steps to verify network configuration and establish a connection.
To Next Page