System setup
9836 3043 01 15 (36)
3.6.1 Radio diagnostics
It is possible to see some radio diagnostics in ToolsTalk Power Focus:
Select Power Focus Map > Tool > Diagnostics > Radio
Figure 14 Radio diagnostics window
If you press the button Radio diagnostic you can get the actual reading for response time, RSSI value
(Received Signal Strength Indication) channel used and MAC address for the accesspoint (BSSID).
Figure 15 Active response time and RSSI value
NOTE: If IRC-B is used it is only possible to see the Active response time.
To Next Page
Loading...
