Instruction Book
9829 2115 69 12
Service warning
A number of service operations are grouped in plans (called Service plans A, B and C).
Each Service plan has a programmed time interval. If a time interval is exceeded, a
message will appear on the display to warn the operator to carry out the service actions
belonging to that plan.
Warning
A warning message also appears if:
• The pressure dewpoint exceeds a programmed value.
• The pressure status in the dryer vessels is not correct. (Elektronikon only)
Automatic restart after voltage failure
For dryers leaving the factory, this function is made inactive. If desired, the function can be
activated. Consult Atlas Copco
To Next Page
Loading...