Instruction Book
25 9829 2115 69
B, the Dryer Pressure Dewpoint, the Dryer Inlet temperature).
Section B shows Status icons. Following icon types are shown in this field:
• Fixed icons
These icons are always shown in the main screen (e.g. Dryer stopped or running,
Dryer status).
• Optional icons
These icons are only shown if their corresponding function is activated (e.g. week timer,
automatic restart after voltage failure, etc.)
• Pop up icons
These icons pop up if an abnormal condition occurs (warnings, shutdowns, service,...)
To call up more information about the icons shown, select the icon using the scroll keys
and press the enter key.
Section C is called the Status bar
This bar shows the text that corresponds to the selected icon, when the menu button is
selected; this text shows the operational state of the dryer.
Section D shows the Action buttons. These buttons are used:
• to call-up or program settings
• to reset a service message
• to have access to all data collected by the regulator
The function of the buttons depends on the displayed menu. The most common functions
are:
Designation Function
Menu To go to the menu
Modify To modify programmable settings
Reset To reset a timer or message
To activate an action button, highlight the button by using the Scroll keys and press
the Enter key. To go back to the previous menu, press the Escape key.
3.5 Calling Up Menus
To Next Page
Loading...